I’m working on improving my projects’ “documentation and build instructions”.
This is the next update:
Attention! This is an OLD version!
An updated and improved version is available!
An updated and improved version is available!
I’m working on improving my projects’ “documentation and build instructions”.
This is the next update:
Hello David,
So I finally did this Simple LFO module, here is the video:
https://www.youtube.com/watch?v=k3BoGHwYfZY
Slowly working my way up to a full modular 😉
I made one. It works! Thanks for sharing this info!
Hi! Would it be possible to add some CV? If so, do you know how?
This circuit is not designed to be CV controlable. But there are some ways you could try. Inserting a voltage at U1 pin 2 (through a 100k resistor for example) might modify the frequency and the ratio (Pulse instead of square wave). Higher voltage, lower freq. But you need to test it as I only simulated it.
An other option would be to replace or add in parallel to the frequency potentiometer a digital potentiometer, or an OTA in variable resistance configuration.
Basically, this looks more complicated than using a simple saw core VCO, in my opinion.
hi I have a version 1.4..
Can I use this build instruction for the 1.4 version?
aha there is a v1.4 build instruction as well…
Aha yes, the updated version can be found
here!
🙂