Tag Archives: Oscilloscope

Debugging MFOS SLMS

I made some scope measurements to help understand and debug faulty MFOS SLMS in SMT version.
My scope is not very accurate and the tested unit is far from perfect, but at least, it gives a pretty good idea of expected signals on the Test Points.

VCO1

First signal to check is VCO1 (TP201). Put VCO1 Frequency pot in middle position (50%), LFO and AR switches on Off position:

VCO1 Test Point (TP201) shows a Clean Sawtooth, from 0 to 4V.

Continue reading Debugging MFOS SLMS